Laser Galvo akara njikwa Software EZCAD3

Nkọwa nkenke:


  • Ọnụahịa otu: Ekwere
  • Usoro nke Paykwụ :gwọ: 100% Na-aga n'ihu
  • Ụzọ nkwụnye ụgwọ: T / T, Paypal, Kaadị akwụmụgwọ ...
  • Mba Onye si: China
  • Ngwa: 2D na 3D Laser Marking, Laser ịgbado ọkụ, Laser tingcha, Laser labeling, Laser osise, Laser Drilling ...
  • Product Ihe

    Ngwaahịa

    EZCAD3 Laser na Galvo Control Software maka Laser Marking, Etching, osise, Cutcha, ịgbado ọkụ ...

    EZCAD3 na DLC2 usoro laser njikwa na ikike ijikwa ọtụtụ ụdị lasers (Fiber, CO2, UV, Green, YAG, Picosecond, Femtosecond ...) n'ahịa, yana ụdị dịka IPG, Coherent, Rofin, Raycus, Max Photonics, JPT, Reci, na Dawei ...
    Banyere njikwa laser galvo, rue Jan 2020, ọ dakọtara na 2D na 3D laser galvo na XY2-100 na SL2-100 protocol, site na 16 bits ruo 20 bits, ma analogical na dijitalụ.
    EZCAD3 ketara ọrụ na atụmatụ niile nke sọftụwia EZCAD2 ma nwee sọftụwia kachasị elu na teknụzụ njikwa laser. Ugbu a, ọ na-ebe kwupụtara na-emegharị site uwa laser usoro Nsukka na ha laser igwe, nke bụ na laser galvo.

    Atụmatụ ọhụrụ Na-atụle EZCAD2

    1. 64 bits Software kernel

    Site na kernel sọftụwia 64, enwere ike ibugo faịlụ buru ibu karịa na EZCAD3 ọsọ ọsọ ọsọ na enweghị ihe ọghọm ọ bụla na oge nhazi data ngwanrọ dị mkpumkpu.

    3. Anọ Axis Control

    Site na ndị na-achịkwa usoro DLC2, EZCAD3 nwere ike ijikwa nke 4 motọ na-ebugharị site na akara ngosi / akara ngosi maka akpaaka ụlọ ọrụ.

    5. Remote Control Via TCP IP

    Enwere ike ịchịkwa sọftụwia EZCAD3 site na iwu ezigara site na TCP IP.

    7. High-Speed ​​MOF

    Ngụkọta ngwanrọ ka mma na-enyere ọsọ ọsọ akara atụnyere EZCAD2. Emepụtara ọrụ pụrụ iche maka ịdebanye aha na ederede ọsọ ọsọ.

    9. Nwayọọ Ike Power Up / Down Control

    enwere ike ịchịkwa ike laser elu / ala nwayọ maka ngwa pụrụ iche.

    2. STL Mpekere

    Site na onye njikwa usoro DLC2, 3D ụdị faịlụ STL nwere ike ibugo ya na EZCAD3 wee belata ya. Na slicing ọrụ, 2D miri osise (osise 3D 3D STL na a 2D elu) nwere ike mere mfe na 2D laser galvo na motorized Z inwego.

     

    4. Nhazi 3D

    Site na njikwa DL2-M4-3D na 3 axis laser galvo, nhazi laser na 3D elu nwere ike iru.

    6. Na-anọghị n'ịntanetị nhazi

    Enwere ike ịchekwa faịlụ 8 kachasị n'ime ọkụ nke bọọdụ nchịkwa ma họrọ site na IO.

    8. Sọftụwia SDK / API

    EZCAD3 sọftụwia mmepe nke abuo / API dị maka ndị na - emekọ ihe usoro iji mee sọftụwia ahaziri iche.

    10. Nwayọọ Nwayọọ Speed ​​/ Down Control

    enwere ike ịchịkwa ngwa ngwa ike elu / ala kpomkwem.

    Ajụjụ

    Kedu onye njikwa laser na-arụ ọrụ na EZCAD3?

    Emepụtara DLC2-M4-2D na onye njikwa DLC2-M4-3D maka sọftụwia laser EZCAD3. Isi ihe dị iche n'etiti mbadamba abụọ a bụ inwe ike ijikwa 3 axis laser galvo ma ọ bụ.

    Kedu usoro ikikere nke EZCAD3?

    EZCAD3 na-eji ikikere + ezoro ezo dongle (Bit Dongle) iji chedo software ahụ. Otu ikike nwere ike rụọ ọrụ kachasị ugboro 5, a ga-etinyerịrị dongle mgbe ị na-eji ya.

    Etu esi nweta nkwalite na EZCAD3 site na EZCAD2?

    Iji kwalite na EZCAD3, ịkwesịrị ịkwalite onye na-ahụ maka laser. Ọ bụrụ n’ịchọghị ime akara 3D, mgbe ahụ DLC2-M4-2D ga-adị mma.

    Etu esi eme faịlụ faili nke EZCAD3 na enweghị njikọ njikwa?

    Ọ bụrụ n’inwere ikike, EZCAD3 nwere ike mepee ma zọpụta faịlụ ọrụ.

    Nkọwa

    Ntọala Sọftụwia EZCAD3.0
    Kernel Akụrụngwa 64 ibe n'ibe
    Ọrụ usoro Windows XP / 7/10, 64 ibe n'ibe
    Nchịkwa njikwa FPGA maka njikwa laser na galvo, DSP maka nhazi data.
    Njikwa Kwekọrọ n'Ozizi njikwa DLC2-M4-2D DLC2-M4-3D
    Las Kwekọrọ n'Ozizi Laser Ọkọlọtọ: eriri
    Interface osisi maka ụdị laser ndị ọzọ
    DLC-SPI: SPI laser
    DLC-STD: CO2, UV, akwụkwọ ndụ akwụkwọ ndụ laser ...
    DLC-QCW5V: CW ma ọ bụ QCW laser chọrọ akara ngosi 5V.
    DLC-QCW24V: CW ma ọ bụ QCW laser chọrọ akara akara 24V.
    Mara: Igwe nwere ụdị ụfọdụ ma ọ bụ ụdị nwere ike ịchọ akara ngosi pụrụ iche.
    A ntuziaka dị mkpa iji gosi na ndakọrịta.
    Kwekọrọ n'Ozizi Galvo 2 axis galvo 2 axis na 3 axis Galvo
     Ọkọlọtọ: XY2-100 protocol
    Nhọrọ: SL2-100 protocol, 16 bit, 18 ibe n'ibe, na 20 ibe n'ibe galvo ma digital na analogical.
    Na-agbatị Axis Ọkọlọtọ: Njikwa 4 axis (PUL / DIR Signals)
    M / O Ntinye 10 TTL, Ntinye 8 TTL / OC
    CAD Na-ejuputa Ndochi azu, ndochi nke nkpuru ahihia, nkuku ajuju na obe.
    oke 8 agwakọta ejuputara na onye oke.
    Font .dị Uredị fure, Mpempe Akwụkwọ Ntanetị, DotMatrix font, SHX font ...
    1D Ogwe Code11, Usoro 39, EAN, UPC, PDF417 ...
    New ụdị nke 1D Barcode ike-atụkwasịkwara.
    2D Ogwe Datamatix, QR Code, Micro QR Code, AZTEC CODE, GM CODE ...
    New ụdị nke 2D Barcode ike-atụkwasịkwara.
    Faịlụ Vector PLT, DXF, AI, DST, SVG, GBR, NC, DST, JPC, BOT ...
    Bitmap Njikwa BMP, JPG, JPEG, GIF, TGA, PNG, TIF, TIFF ...
    3D Njikwa STL, DXF ...
    Ọdịnaya Dynamic Ofu ederede, ụbọchị, oge, kiiboodu Input, wụpụ ederede, ederede edepụtara, faịlụ ike
    enwere ike izipu data site na Excel, Faịlụ ederede, Oghere Usoro, na ọdụ ụgbọ Ethernet.
    Ọrụ Ndị ọzọ Galvo mmezi Mmezi nke ụlọ,
    3X3 isi mmezi na Z-axis mmezi.
    Uhie Uhie
    Njikwa Paswọdu
    Multi-File nhazi
    Multi-Layer nhazi
    STL Mpekere
    Nlele Igwefoto Nhọrọ
    Njikwa Remote Via TCP IP
    Oke nnyemaaka
    Guzoro Nanị Ọrụ
    Nwayọọ Ike Ike UP / Down Nhọrọ
    Nwayọọ nwayọọ Speed ​​UP / Down Nhọrọ
    4.0gwé ojii 4.0 Laser ígwé ojii Nhọrọ
    Ọba akwụkwọ Software Nhọrọ
    Ọrụ PSO Nhọrọ
    Ahụkarị
    Ngwa
    2D Laser akara
    Nbanye na Thely
    Ihe osise 2.5D
    3D Laser akara
    Rotary Laser akara
    Gbasaa Laser Marking
    Laser ịgbado ọkụ na Galvo
    Laser tingcha na Galvo
    Nhicha Laser na Galvo
    ngwa ngwa laser ndị ọzọ na Galvo. Biko jụọ ndị injinia ahịa anyị.

    Ulo nbudata nke EZCAD2

    EZCAD3 Software Nbudata

    EZCAD3-2020
    EZCAD3-2019
    EZCAD3-2018
    EZCAD3-2017
    EZCAD3-2016
    EZCAD3-2015

    EZCAD3 Software Manual Download

    EZCAD3-2020 Ntuziaka

    EZCAD3 Software Driver Nbudata

    EZCAD3
    NKP
    NKP
    Ugboro abụọ
    Ugboro abụọ
    DLC2-M2-2D
    DLC2-M4-3D

    EZCAD3 njikọ Video


  • Nke gara aga:
  • Osote: