2D/3D Laser and Galvo Controller – DLC Series EZCAD3
Laser and Galvo Controller Board for 2D and 3D Laser Marking and Other Applications with Galvo
DLC2 series is the new generation of laser controller developed by JCZ, which works with EZCAD3 software. It can control most of the fiber laser in the market directly and other types of laser sources such as CO2, UV, Green, Picosecond and Femtosecond can also be controlled via a small interface board.
It is also compatible with the 2 axis and 3D axis laser galvo scanner with both XY2-100 and SL2-100 (A small interface board needed) protocols.
It will replace the LMC controller, which works with EZCAD2 software, and become one of the most-used controllers for laser marking, welding, cutting, and other types of laser processing with galvo scanner.
DLC2-M4-2D and DLC2-M4-3D both work with EZCAD3 software. The only difference between them is to be able to control 3 axis laser galvo scanner to processing on 3D surface or not.
DLC card can control common laser types on the market.
Regarding special laser models, JCZ has designed 5 extend boards according to customer market requirements.
STD: CO2/YAG with STD extend board
YLPE: with YLPE extend board
SPI: with SPI extend board
QCW: with QCW((include 5V&24V)) extend board
|Compatible Laser||Standard: Fiber
Interface board for other types of laser
DLC-FIBER-E: IPG TypeE Laser
DLC-SPI: SPI Laser
DLC-STD: CO2, UV, Green Laser...
DLC-QCW5V: CW or QCW Laser requires 5V control signal.
DLC-QCW24V: CW or QCW Laser requires 24V control signal.
|Note: Lasers with some brands or models may need special signals, a manual is needed to confirm the right controller.|
|Compalitable Galvo||2 axis galvo||2 axis and 3 axis Galvo|
| Standard: XY2-100 Protacal
Optional: SL2-100 Protacal,16 bit,18 bits and 20 bits galvo.
|Extending Axis||Standard: 4 axis Control (Pul/Dir Signals)|
|I/O||10 TTL Inputs, 8 TTL/OC Outputs|
|Power Supply||12V 3A|
DLC2 Interface Board Manual